Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Parts for Highlands Homeowners
A worn roller, a frayed cable, a bottom seal that’s crumbled away after a Colorado winter: parts fail long before a whole door does, and the right replacement gets you back to normal without paying for a new door. We handle that on both sides. We supply the part and we install it. Our technicians have up to 9 years of experience with torsion springs, cables, drums, hinges, rollers and seals, and we work on Amarr, Wayne Dalton, Craftsman and Raynor equipment among the major residential brands. If your door is grinding, drifting or hanging crooked, that’s usually a part talking. Call (877) 492-1832. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and same-day repair is often possible in Highlands.
What Our Garage Door Parts Service Includes
Parts work on a garage door isn’t one job. It’s six or seven small mechanical systems that wear at different rates, and knowing which one is failing is most of the diagnosis. Here’s what we handle and when each piece tends to come up.
Torsion Spring
A torsion spring is the coiled steel bar mounted on the header above the door, and it does the heavy lifting so you don’t have to. When it snaps, the door becomes almost impossible to raise by hand and often won’t open at all. We replace torsion springs as a core service, matched to your door’s weight, and we treat it as the safety-critical repair it is: winding a spring under tension is the one part of garage door work that genuinely injures people who try it themselves. Leave that to a trained technician.
Extension Spring
Extension springs run along the horizontal tracks on either side and stretch as the door closes. They’re common on older doors and on many Wayne Dalton and Craftsman installations around Highlands. When one breaks, the door slams down on one side and can bend a track or twist a panel, so a stretched or kinked spring shouldn’t wait. We replace them in matched pairs so the door stays balanced.
Cables & Drums
The cables run from the bottom corners of the door up to the drums on the torsion bar, and they’re what transfer the spring’s force to the door. A frayed cable is a real hazard because a snapped one lets a corner drop without warning. We replace cables and drums together when either shows wear, since a new cable on a worn drum tends to fail early.
Rollers & Hinges
Rollers ride inside the track and hinges connect the panels, and together they’re the parts you hear before you see. A squealing, shaking door usually has flat-spotted steel rollers or hinges that have worn oval. We swap them for quiet nylon or steel rollers as your door calls for, and we check the hinges while we’re in there so you’re not back on the phone in a month.
Weatherstripping
Weatherstripping seals the sides and top of the door against drafts, dust and insects. In Highlands it also takes the brunt of freeze-thaw cycles, dry air and summer hail, and it hardens and cracks faster than homeowners expect. We fit new vinyl or brush weatherstripping sized to your door’s frame, which cuts drafts and keeps debris out of the track.
Bottom Seal
The bottom seal is the rubber or vinyl strip along the lowest panel, and it’s the first thing to fail on most doors. A cracked or missing seal lets in snowmelt, leaves and mice, and it throws off the door’s contact with the ground. We install the right profile for your door type, including the retainer style Amarr and Raynor doors use, so it seats flat and lasts.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Parts
We work on Amarr doors and know where their panel joints and hardware tend to wear first. Amarr builds a range of steel and carriage-house styles, and the parts that go are consistent enough that we usually know what we’re dealing with before we arrive. Wayne Dalton is another brand we see a lot of in Highlands, especially its torsion and extension spring setups, and we’re familiar with the way its proprietary hardware fits together.
Craftsman doors and openers show up on a lot of older homes, and we understand their legacy spring and roller configurations. Raynor equipment rounds out the list, and we service the springs, cables, drums and seals those doors use. Whether you have Amarr, Wayne Dalton, Craftsman, Raynor or any other make, we can help. If you’re not sure what brand your door is, we can sort that out on arrival, and you can always review our garage door parts page before you call.
Signs You Need Garage Door Parts Right Now
Most part failures announce themselves. Here are the warnings worth acting on.
- A loud bang from the garage. A torsion spring snapping sounds like a gunshot from inside the house. If the door won’t lift after that, stop pulling on it and call – the spring has failed and the opener is now fighting a dead weight.
- The door won’t close all the way. A gap at the bottom or a door that reverses on its own usually points to a worn bottom seal, a misaligned track or a failing sensor. It’s a small part, but it leaves your garage open to weather and pests.
- Grinding, squealing or a shaking door. Worn rollers and hinges make noise and vibration that gets worse over time. Replacing them early is far cheaper than the panel and track damage a shaking door causes.
- Frayed or kinked cables. Look at the cables along the sides: if strands are broken or the cable looks like a frayed rope, it’s near failure. Cables are under heavy tension, so this is a hands-off repair for a trained technician.
- The door drifts or feels unbalanced. A door that won’t stay put halfway up usually has a spring that’s lost tension or a cable that’s slipped. Left alone, the opener motor takes the strain and fails next.
Our Garage Door Parts Process – Step by Step
- 1
We listen and ask. Before we arrive we ask what the door is doing – noise, drift, gap, or nothing at all. That narrows the likely part and helps us bring the right pieces, so we’re not making a second trip for a roller or a seal.
- 2
We inspect the whole system. A failed part is often a symptom. We check the springs, cables, drums, rollers, hinges, tracks and opener together, because a worn roller can be the reason a cable frayed in the first place. This is where a specialist diagnosis saves money.
- 3
We give you a written price before we touch anything. You get the part, the labor and the total in writing, and you agree to it before work begins. No surprises and no invoice that grew on the way to the door.
- 4
We install and balance. We fit the replacement parts, match springs to the door’s actual weight, and balance the door so it moves smoothly by hand. We run it through full open-and-close cycles and check the safety reverse before we call it done.
- 5
We walk you through it. We show you what failed and what we replaced, plus anything worth watching on the rest of the door. If a bigger repair or a new door is the smarter call, we’ll tell you straight – we do garage door repair too, so you don’t get handed off.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Parts Cost in Highlands?
Parts pricing depends on which part fails and how many are worn alongside it, but these typical estimates give you a realistic starting point. A torsion spring replacement runs $180 – $340 for one spring, and since a matched pair usually goes together, a pair costs about twice that. Cable repair runs $130 – $250, roller replacement $110 – $220, track realignment $120 – $240, and panel replacement $250 – $500. Repair work overall typically falls between $150 and $600 depending on the job. Weatherstripping and bottom seals are usually the least expensive parts line.
What affects the price: the part itself, whether a pair is needed, the door’s size and weight, and whether a worn part has taken a track or panel with it. To avoid overpaying, get the diagnosis in writing and ask whether a related part is close to failing, because replacing a bearing plate or hinge while the door is already apart is cheaper than a second visit.
Every estimate is free, and the written estimate sets the final price – the price is quoted and agreed before any work starts. Need an exact figure? Call (877) 492-1832.
Garage Door Parts Near Highlands – Our Service Area
We serve Highlands and the neighborhoods around it, including Berkeley, Bear Valley, Virginia Village, Sunnyside, Sloan Lake, Central Park, Capitol Hill, Cherry Creek, Wheat Ridge and Baker. Response is quick across the metro, and same-day repair is often possible when you call early. If you’re in a neighboring area, get in touch and we’ll confirm timing. You can also see the garage door parts page for Berkeley and the garage door parts page for Bear Valley.
Serving Highlands, CO – Our Local Coverage Area
We serve Highlands and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Parts in Highlands
Garage door parts service is the diagnosis, supply and installation of the individual components that make a door work: springs, cables, drums, rollers, hinges, weatherstripping and bottom seals. Instead of replacing the whole door when one part fails, we identify the worn piece and replace it. We supply the part and install it, so you’re not hunting for hardware and then finding someone to fit it.
Most single-part repairs finish in one visit, often within an hour or two, and spring or cable jobs can take a bit longer because we balance the door afterward. If the part needs to be ordered, we tell you upfront rather than letting you wait without an answer. We also service the opener itself, so a failed motor or sensor is covered too.
Typical estimated ranges in Highlands are $180 – $340 for one torsion spring (a pair runs about twice that), $130 – $250 for cable repair, $110 – $220 for rollers, $120 – $240 for track realignment and $250 – $500 for panel replacement. The written estimate sets the final price, and we quote it before any work starts. Call (877) 492-1832 for an exact quote – estimates are free.
Yes. We service Amarr and Wayne Dalton equipment along with Craftsman, Raynor, Clopay, LiftMaster, Chamberlain and Genie. Knowing how each brand’s springs, drums and hardware fit together speeds up the diagnosis and means fewer surprises on arrival. If your brand isn’t one of those, call and we’ll tell you straight whether it’s a job we take.
Same-day repair is often possible in Highlands, especially if you call earlier in the day. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday, and a call outside dispatch hours is booked into the next opening. Call (877) 492-1832 and we’ll set a time.
Warranty terms depend on the part and the job, and we explain what’s covered in writing with your estimate before work begins. We stand behind the installation and the parts we supply, and we walk you through the terms at the quote stage so there’s no confusion later. If something fails, call us and we’ll sort it out.
Clear the area under and around the door so technicians can work safely, and move anything stored against the tracks. Don’t try to force a stuck door open or closed, and leave spring and cable work alone – those parts are under heavy tension and can cause serious injury if handled without training. Have a rough idea of when the problem started, and note any noises or symptoms. Then call (877) 492-1832 to book it.
Schedule Your Garage Door Parts Service in Highlands Today
One worn part shouldn’t mean a new door, and it shouldn’t mean a week of waiting either. Call (877) 492-1832 and we’ll diagnose what failed, supply the right part and install it, with a written price agreed before we start. We answer 24/7, dispatch fast from 7am to 7pm Sunday through Friday, and your estimate is free. Get your door working again.
Written by the team at Highlands Garage Door Repair Pros.