Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Highlands?
Spring replacement in Highlands typically costs $180 to $340 per spring, and that range covers the spring itself, the labor, and the safety check on the rest of the door. Garage doors almost always carry two springs, and a matched pair is usually replaced together, so a two-spring job lands right around double that figure. The written estimate you get before any work starts is the price you’ll pay.
That’s the short answer, and for most homeowners it’s all they need to make a decision. What follows explains where those dollars go, what pushes a quote up or down in Highlands, and what to check before you say yes to anyone.
Key Takeaways
- A single torsion or extension spring replacement in Highlands runs about $180 to $340.
- Springs are replaced as a matched pair, so budget roughly double the single-spring range.
- Our technicians have up to 9 years of experience, and spring work is a core service for us, not a side job.
- Estimates are free and pricing is set per job by the written estimate. Call (877) 492-1832 to schedule one.
Spring Replacement Cost Breakdown (2026)
Here’s how the line items usually shake out for a residential door in the Highlands market. Treat these as typical estimated ranges for planning; your written estimate sets the final number.
| Line Item | Typical Estimated Cost |
|---|---|
| Single spring replacement (one spring) | $180 – $340 |
| Matched pair replacement (both springs at once) | About twice the single-spring range |
| Cable repair (often done alongside spring work) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement (if a spring failure damaged a section) | $250 – $500 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| General garage door repair (diagnostic catch-all) | $150 – $600 |
| New door installation (if the failure reveals a worn-out door) | $700 – $2200 |
Why would a quote land at $180 on one door and $340 on another? The biggest driver is spring type. Torsion springs sit on a shaft above the door and extension springs run along the sides; the two are built and wound differently, and the hardware that goes with them differs in cost. Door weight matters too. A heavy insulated double door needs heavier springs than a light single-car door, and heavier springs cost more. If your cables or rollers are showing wear, bundling that work into the same visit usually costs less than coming back for it separately. And if the spring snapped hard enough to bend a track or crack a panel, that repair gets added on top of the spring itself.
One more thing worth knowing: spring work is one of the few garage door jobs that genuinely can hurt you. Torsion springs are under enough tension to break bones, and the winding process is unforgiving of a slip. This isn’t a repair to take on with a YouTube video and a pair of gloves. A trained technician does it with the right winding bars, the door secured, and the springs matched to the door’s weight. That’s a big part of what the labor line on your quote is paying for.
What Affects Spring Replacement Pricing in Highlands
Highlands sits up against the Front Range foothills, and that setting shows up in the details of spring work more than you’d expect. Here’s what moves the number:
- Cycle rating of the spring. Standard springs are rated for a certain number of open-and-close cycles. A higher-cycle spring costs more up front but lasts longer. If your door gets cycled a lot (a busy household where everyone drives), the upgrade often pays for itself. Ask what cycle rating is going into your door.
- Single versus double door. A wide double-car door carries a heavier load than a single, so it needs beefier springs, and that’s reflected in the price. This is the single most common reason a Highlands quote comes in higher than a neighbor’s.
- Foothills temperature swings. The Highlands area sees cold winters and hot summers, and that expansion and contraction cycles the metal in springs and cables. Repeated temperature swings are one reason springs fail here, and they’re also a reason to check the cables and rollers at the same time so you’re not paying for two visits.
- Age of the door and the rest of the hardware. When a spring lets go on an older door, it often takes a roller, a cable, or a bearing plate with it. A technician who checks the whole system on the same visit can quote the whole job at once instead of diagnosing, repairing, and re-diagnosing across separate appointments.
- Brand and model of the door. We work on doors from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, and parts availability for those brands is reliable. If your door was built by a maker we don’t service, we’ll tell you straight so you’re not wasting a call.
- Access and door condition. A door that’s stuck in the closed position, or a garage packed tight around the door, can add time to the job. Clear a working path around the door before the technician arrives and you’ll keep the labor side of the quote lean.
If you want the full picture of how we approach the repair itself, our spring replacement page walks through the process from diagnosis to final balance-and-test.
How to Save on Spring Replacement
Spring replacement isn’t the place to chase the lowest bid, but there are real ways to keep the total down without cutting corners:
- Replace both springs at once. It sounds like spending more, but when one spring breaks, the other has been under the same load for the same number of cycles and is usually close behind. Paying for a second service visit later, plus another pair of hands on the door, usually costs more than doing the pair now.
- Bundle the small stuff. If your rollers are worn or a cable is frayed, adding that to the spring visit is cheaper than a separate trip. Ask the technician to check the full system while they’re there.
- Get a written estimate before anyone touches the door. A free estimate means you know the price before the work starts. Call (877) 492-1832 and we’ll set one up.
- Lubricate the moving parts between services. A little lubricant on the rollers, hinges, and the spring itself (never on the tracks) reduces friction and eases the load on the springs. It won’t make a spring last forever, but it helps.
- Don’t ignore the warning signs. A door that’s getting harder to lift, or a spring that looks stretched or has a gap in it, is telling you something. Catching it before it snaps usually means a simpler, cheaper repair than dealing with a broken spring and the damage it can do on the way down.
- Ask about cycle rating. If you plan to stay in your Highlands home for years, a higher-cycle spring can be the better value even at a slightly higher up-front price. The technician can explain the trade-off and let you decide.
Our estimates are free and the price is set per job by the written estimate, so there are no surprises after the fact. If a repair isn’t the right call and a new door makes more sense, we handle Highlands Garage Door Repair Pros installation too, so you don’t have to call a separate installer after a repair company says the door is done.
Can You Replace My Springs the Same Day?
In most cases, yes. Spring replacement is one of the most common calls we get, and our technicians carry the knowledge to diagnose and fix a broken spring on the first visit for the brands we service. Call (877) 492-1832 and we’ll book you in. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
What makes same-day more likely: knowing your door type and brand when you call, having the garage clear enough for the technician to work, and being available to let them in. What can push it out: a door that needs a part ordered in a brand we don’t stock for, or a spring failure that took a cable or panel with it. In those cases you’ll get an honest timeline up front rather than a promise we can’t keep.
Most spring calls are straightforward. If your door is stuck open or stuck closed and you can’t get your car out, say so when you call. We’ll be straight with you about what’s realistic for the day. A call outside dispatch hours gets booked into the next opening, Sunday through Friday, 7am to 7pm.
Why Springs Fail in Highlands and What to Watch For
Springs are a wear item. Every time you open and close the door, the spring winds and unwinds, and the metal fatigues. In the Highlands area, the temperature swings between Front Range winters and summer heat add a little extra cycling to that metal. Eventually, the spring reaches the end of its rated cycles and fails.
What you’ll notice first: a loud bang from the garage (often mistaken for a gunshot or a car backfire), a door that suddenly won’t lift, or a gap in the middle of one of the springs when you look at it. Sometimes you’ll see the door go up part way and stop. A snapped spring is the usual cause.
A few things worth checking on your own door:
- A visible gap in a spring means it’s broken and no longer counterbalancing the door.
- If the door feels very heavy when you lift it manually, the spring is doing less than it should. Stop lifting and leave it for a professional.
- If the door sits crooked or drifts, the springs or cables may be unevenly tensioned.
- If the safety reverse on your opener doesn’t stop the door when it meets an object, get it looked at before anything else.
Don’t try to wind, unwind, or remove a torsion spring yourself. The stored energy in a wound spring is serious, and a slip can cause severe injury. This is one repair to hire out with confidence, not to test on your own door.
Repair or Replace? A Quick Guide
Spring replacement is nearly always cheaper than a new door, and for a door that’s otherwise sound, it’s the right call. The worksheet below helps you decide. If the door is sagging, the panels are dented or rusted through, or the whole system is at the end of its life, a replacement may make more financial sense. For that decision, a free estimate gives you both numbers side by side. Call (877) 492-1832 and we’ll lay out the options.
- Spring broken, door otherwise in good shape: repair the springs, replace as a pair.
- Spring broken plus bent track or panel: repair both; a panel replacement ($250 – $500) can rescue a door that looks totaled.
- Door is 15 to 20 years old and needs multiple repairs: price a new door ($700 – $2200) before committing to a repair.
- Door is unsafe (falls, reverses unpredictably, or comes off track): stop using it and call for a diagnosis.
FAQs – Spring Replacement Cost
How much does garage door spring replacement cost in Highlands?
Spring replacement in Highlands typically costs $180 to $340 for a single spring. Because doors usually have two springs and they’re replaced as a pair, most homeowners end up around double that range. Call (877) 492-1832 for an exact quote. Estimates are free and the written estimate sets the final price.
Is it cheaper to repair or replace a garage door spring?
Repair is almost always cheaper than a new door. A spring replacement runs $180 to $340 per spring, while a full new door installation runs $700 to $2200. Unless the door itself is failing (sagging panels, a bent track, structural rust), replacing the springs is the sensible choice. Call (877) 492-1832 and we’ll give you both numbers so you can compare.
How often do garage door springs need to be replaced?
Spring life is measured in cycles, not years, so there’s no single answer. High-cycle springs last longer than standard ones, and a busy household with a door opening several times a day will wear out springs faster than one that’s opened once or twice. Most springs give no warning before they fail, so a periodic check of the springs and cables is worth doing. Call (877) 492-1832 if you want a technician to assess yours.
Can I replace a garage door spring myself?
No, we don’t recommend it. Torsion springs are under enough tension to cause serious injury if they slip during winding or removal, and the proper tools and door-securing steps matter. A trained technician handles this safely. Call (877) 492-1832 and we’ll take care of it.
Do you work on my brand of garage door?
Yes, for most residential doors. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. If you’re not sure what you have, say so when you call (877) 492-1832 and we’ll sort it out. If your door is a brand we don’t service, we’ll tell you straight.
What Happens When You Call
When you call (877) 492-1832, we’ll ask about your door, what it’s doing (or not doing), and roughly how old it is. We’ll book a time, and a technician will come out, inspect the springs and the rest of the system, and give you a written estimate before any work begins. The estimate covers the spring, the labor, and any related repairs we find while we’re there. If you approve it, the work gets done. Same company, start to finish. If a repair isn’t the right call and a replacement makes more sense, we handle that too, so there’s no handoff to an installer.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday. For a garage door that’s stuck and springs that have let go, this is one of those calls best made now rather than later. The estimate is free, so there’s no cost to finding out exactly what your repair will take.
Call (877) 492-1832 for a free estimate. We’ll tell you what’s wrong, what it costs, and when we can get the door working again.
Written by the team at Highlands Garage Door Repair Pros.
Pricing reflects the Highlands market as of 2026. Highlands Garage Door Repair Pros offers free estimates – call (877) 492-1832.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Danielle Walsh"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Miguel Guzman"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Kurt Miller